Search Resources

Showing 1 – 10 of 12 matching resources

3/16 inch Tubing with Check Valves Trial

In a normal sap flow event, trees exude sap during the above freezing period and replenish that lost water by ÒsuckingÓ it up from the roots during the below freezing period. If on a tubing system, during this negative pressure period they tend to draw sap back into the tree from the dropline. Sap, once it enters the droplines, is quickly contaminated with microbes. When they are drawn back into the tree, tap hole closure is initiated. The problem is compounded in 3/16- inch tubing because, unlike 5/16-inch tubing, the smaller diameter collection tube remains full of sap. A Cornell study found that up to 12 feet of sap in a 3/16-inch tube can be drawn back into the tree during this recharge time. CV spouts are one proven method of limiting this drawback with 5/16 inch tubing. The question was: will they also be effective with 3/16-inch tubing that is full of sap?

Date:
June 1, 2018

Making Maple Syrup in a Land of Funnel Cakes and Pulled Pork

Making maple syrup in the mild climate of southern Illinois is lesspredictable and more work. The sap seasons are longer, there is an almost certain need to freshen the tap holes, and the freeze-thaw cycles are less predictable.

Publication:
Maple Syrup Digest
Date:
December 1, 2005

Research into Designing a Walnut Specific Spile

During the 2019 sap season, Future Generations University, with funding from the West Virginia Department of Agriculture, began a series of tapping studies on tree species other than maple. We tapped and made syrup from black walnut trees. We had trouble developing the expected natural vacuum on the 3/16-inch lines, even though they had plenty of slope. We assumed that the problem was related to vacuum leaks associated with a poor seal in the soft wood with the minimally tapered spouts.

Date:
April 1, 2020

Sycamore Sap and Syrup Field Trial

This study showed that sycamore does produce a sweet sap flow that can be boiled down to roduce a syrup. That syrup had a nice taste, that some people say has a butterscotch like flavor. This is a new sap and syrup product, that will need more work to develop taping strategies that could lead to its commercial production. Likewise we need more information on the sap and syrup chemistry before we can provide guidance to potential syrup producers.

Date:
March 31, 2019

Tapping Depth & Sap Quantity

Accepted tapping practices for 7/16 inch spouts with no vacuum called for tap holes to be drilled 2-2.5 inches deep. Later practices for 5/16 inch spouts under vacuum, call for drilling the tree to a depth of 1.5 inches. The reason for the reduction in depth, was to reduce the occurrence of drilling into dead wood, especially on trees with a long history of tapping. This can lead to reduced sap yield. When the 2018 season left us with an unusually low sap yield, the question arose: does tap depth matter when the system is under vacuum?

Date:
June 1, 2019

Tapping into Sappy Non-Timber Forest Products for Fun and Profit

What I am proposing in this article is that woodland owners consider sap and syrup production as a way to increase the financial benefits derived from their forest resource by tapping their trees, and increase the fun in owning a woodlot with a good “sugarin off” party.

Publication:
National Woodlands
Date:
October 1, 2021

Tapping on National Forest Lands

When looking to expand the maple industry people often look at the large acreages of forested lands in the public domain. In West Virginia, 16.5 percent of the land is in public ownership, and in Virginia, 17.1 percent. Of that, the largest acreage is managed by the federal National Forest System (NFS). Sugarbush owners adjoining NFS lands might look across the line to tapable maple stands in the national forest. Private citizens or community groups could also look at public lands as a way to get in the business. In this study, we investigated an example of a community group, the Mt. Rogers Volunteer Fire Department and Rescue Squad, that is running a successful maple sugaring operation by tapping trees in the adjoining George Washington-Jefferson National Forest. We examined the sugaring operation and the impacts that the sugaring operation is having on the Whitetop community.

Date:
March 1, 2019

Tapping Walnut Trees: Studies on Walnut Sap Flow

Black Walnut (Juglans nigra) is a tree to consider tapping, and Butternut (Juglans cinerea) has similar characteristics and can produce syrup. When considering tapping, however, it is good to understood that walnut trees and not just maples with compound leaves and big edible nuts. Walnuts have anatomical and physiological characteristics that affect tapping and syrup making.

Publication:
Maple Syrup Digest
Date:
September 1, 2021

The Effect of Vacuum on Walnut Sap Flow

Our objective in this 2020 study was to revisit walnut tree sap flow and to determine whether vacuum applied to sap collection lines would substantially increase the production of walnut sap. Along the way, we made some somewhat startling and troublesome observations and formulated a next generation of questions that need to be answered to allow a viable walnut syrup industry to develop.

Date:
April 1, 2020