Showing 11 – 16 of 16 matching resources

Potential Plastic Residues in Maple Sap and Syrup Following Isopropyl Alcohol Sanitation of the Tubing System

In recent years isopropyl alcohol (IPA) sanitation was proposed after the sugar season to significantly reduce the microbial load and start the next sugar season with a sanitized system. This study was conducted to evaluate the potential leaching of chemical compounds found in plastic polymers used in maple sap collection system tubing.

Procedures for Neutralizing Maple Wash Water

Wash waters resulting from the use of cleaning chemicals for reverse osmosis (RO) membranes and evaporator pans are often strongly basic or acid, and should be neutralized before disposal in order to comply with Vermont Department of Environmental Conservation regulations. These instructions for neutralizing maple wash water will allow you to modify your used maple cleaner to a safe pH range.

Sanitary Design and Construction of Food Equipment

To ensure safe food and adequate sanitation programs, the equipment used for processing and handling food products must be designed, fabricated, constructed, and installed according to sound sanitary design principles. This ensures the equipment can be adequately cleaned and sanitized, and that surfaces are resistant to daily exposure to corrosive food products and cleaning/sanitizing chemicals. Equipment that does not meet basic sanitary design principles, or is installed or used improperly cannot be adequately cleaned and sanitized.

Tubing Cleaning – Methods Used in the U.S.

A wide variety of cleaning techniques are currently used in the maple industry, including rinsing the system with pressurized air and water, or attempts to sanitize with chemical solutions such as peroxide, bleach, or alcohol. However, the effectiveness of these cleaning techniques in reducing microbial populations and increasing annual sap yield is often questionable.

Update on the Maple Tubing Sanitation Research in Ontario

In the spring of 1998, a research project was initiated to develop alternative methods for maple produces using plastic tubing systems. Although the results are only preliminary, the development of alternative sanitation methods that may reduce reliance on chlorine is looking very promising.