Resource type: Research

Showing 101 – 110 of 377 resources

The Goldilocks touch: Overdriving spouts reduces sap yield

One of the more common questions producers have when about tapping maple trees is Òhow deep should spouts be driven in to the taphole?Ó. Unfortunately, there is not a simple answer, since different spouts have different dimensions, variable degrees of taper and steps, and are made of different materials with dissimilar degrees of Òstickiness.Ó Regardless, the importance of driving spouts in to the proper depth is readily apparent: if spouts are driven too shallow there is a risk that spouts can leak vacuum or heave easily during freezes, but if driven too deeply, small cracks may form which cause liquid and vacuum leaks or alternatively, the reduced amount of exposed wood surface area inside the taphole caused by driving spouts in too deeply may reduce sap collection.

Publication:
Maple News
Date:
September 19, 2019

Maple Science

Maple education for Junior High School Audience

Date:
August 23, 2019

Effect of the new high vacuum technology on the chemical composition of maple sap and syrup

Techniques used to produce maple syrup have considerably evolved over the last decades making them more efficient and economically profitable. However, these advances must respect composition and quality standards as well as authenticity of maple products. Recently, a new and improved high vacuum technology has been made available to producers to achieve higher sap yields. The aim of the present study was therefore to evaluate the effect of this new system on the yield of sap and on the sap and syrup chemical composition.

Publication:
Heliyon
Date:
June 1, 2019

Tapping Depth & Sap Quantity

Accepted tapping practices for 7/16 inch spouts with no vacuum called for tap holes to be drilled 2-2.5 inches deep. Later practices for 5/16 inch spouts under vacuum, call for drilling the tree to a depth of 1.5 inches. The reason for the reduction in depth, was to reduce the occurrence of drilling into dead wood, especially on trees with a long history of tapping. This can lead to reduced sap yield. When the 2018 season left us with an unusually low sap yield, the question arose: does tap depth matter when the system is under vacuum?

Date:
June 1, 2019

Characterization and Removal of Buddy Off-Flavor in Maple Syrup

Buddy maple syrup is characterized by an unpleasant cabbage?like flavor occurring generally toward the end of the sap harvest season. Occurrence of buddy off?flavor leads to a decrease in syrup value and economic loss for the industry. It is therefore relevant to characterize the off?flavor in order to apply corrective treatments. HS?SPME combined with GC/MS was applied to analyze volatile aroma compounds in buddy maple syrup samples. Two novel volatile sulfur compounds were found in maple syrup: dimethyl disulfide (DMDS) and dimethyl trisulfide. A 3?alternative forced choice in ascending concentration of different buddy syrups diluted in good quality syrup was conducted in triplicate to assess buddy syrup concentration thresholds leading to detection and recognition of the off?flavor by 16 panelists while monitoring volatile aroma compounds in diluted samples. Results showed that DMDS was associated with the flavor defect. The recognition threshold concentration of buddy syrup varies depending on the syrup sample and the off?flavor can be detected in syrups containing very low DMDS content. Application of a continuous heat treatment on buddy syrups for 2 hr at 104.5 ¡C led to a removal of the buddy off?flavor as well as a significant reduction in DMDS content.

Publication:
Journal of Food Science
Date:
May 23, 2019

Perceptions of U.S. and Canadian maple syrup producers toward climate change, its impacts, and potential adaptation measures

The production of maple syrup is an important cultural and economic activity directly related to the climate of northeastern North America. As a result, there are signs that climate change could have negative impacts on maple syrup production in the next decades, particularly for regions located at the southern margins of the sugar maple (Acer saccharum Marsh.) range. The purpose of this survey study is to present the beliefs and opinions of maple syrup producers of Canada (N = 241) and the U.S. (N = 113) on climate change in general, its impacts on sugar maple health and maple syrup production, and potential adaptation measures.

Publication:
PLOS ONE
Date:
April 25, 2019

Sycamore Sap and Syrup Field Trial

This study showed that sycamore does produce a sweet sap flow that can be boiled down to roduce a syrup. That syrup had a nice taste, that some people say has a butterscotch like flavor. This is a new sap and syrup product, that will need more work to develop taping strategies that could lead to its commercial production. Likewise we need more information on the sap and syrup chemistry before we can provide guidance to potential syrup producers.

Date:
March 31, 2019

Walnut Sap Flow and Syrup Making Field Trial

A 107 tap study area was established at John DalenÕs farm in Franklin WV. At this site we carried out a series of trials to learn about walnut sap flow, and to address sap and syrup production issues as they arose. We also collaborated with walnut sap producers in Palestine and Leon WV, and with Virginia TechÕs Catawba Sustainability Center in Blacksburg VA. The analysis section of this report is based on the work done at the Dalen farm study area.

Date:
March 31, 2019